VP5F – Single Pumps
Ordering Code
| VP5F | -A | 5 | -50 | ||
|---|---|---|---|---|---|
| Series No. | Outlet Flow (lpm) at 3.5 bar, 1800 rpm | Operating Pressure range (bar) | Design No. | ||
| VP5
Flange Mounting |
Code | Outlet Flow (lpm) | Code | Pressure Range | 50:PT(Rc)
5080:PF(G) 5090:NPT |
| A | 30 lpm | 2 | 15 ~ 35 bar | ||
| B | 40 lpm | 3 | 20 ~ 70 bar | ||
| Factory Setting Qmax. | 4 | 50 ~105 bar | |||
| 5 | 70 ~ 140 bar | ||||
| Factory Setting Pmin. | |||||
Operating Data
High Efficiency Operation With High Pressure.
Under the conditions of pressure 140 bar,the 5 pump is stable and highly efficient.Due to our improvement designs “THREE POINT RING” support systems.
No Vibration And Quiet.
The cam ring is specifically designed to have a special curve so the noise level (dB) is very low,even in the high pressure operations.
Sharp Characteristics And Quick Response.
Quick response displayed in both “ON-OFF” control of operation,due to use special design “BIAS PISTON” stable and accurate operation can be attained in an instant.
Stable Flow.
Due to use new design “PRESSURE BALANCE MECHANISM” the output flow pressure control systems, the output flow is very stable even in the high pressure ranges.
Energy Saving Type.
Power loss has been reduced further by application of our highly advanced precision machining technology to assure the same high efficiency performance.As the “VP5″ series with many new mechanisms of our improvement designs.And the power loss at the “dead head” has been reduced by a large degree.
Easy Testing And Maintenance.
Pressure adjusting screw,and the volume adjusting screw were located at the same side,and ensure easy testing at a glance.
Performance Curves
Assembly
Parts List:
| No. | Part Name | Specification | Quantity |
|---|---|---|---|
| 1 | Retainer Ring | R42 | 1 |
| 2 | Shaft Seal | TCV 224211 | 1 |
| 3 | Pump Body | 1 | |
| 4 | Piston | 1 | |
| 5 | Socket Set Screw | M4xP0.7x5L | 1 |
| 6 | Piston | 1 | |
| 7 | O-Ring | 1A-P5 | 1 |
| 8 | O-Ring | 1A-P20 | 1 |
| 9 | O-Ring | 1A-P6 | 2 |
| 10 | Cover | 1 | |
| 11 | Socket Head Cap Screw | M6xP1.Ox35L | 4 |
| 12 | Socket Set Screw | M12xP1.75x25L | 1 |
| 13 | Hexagon Nut | M12xP1.75 | 1 |
| 14 | O-Ring | 1A-P6 | 3 |
| 15 | Body | 1 | |
| 16 | Hold | 1 | |
| 17 | Spring | 1 | |
| 18 | O-Ring | 1A-P14 | 1 |
| 19 | Spring Retainer | 1 | |
| 20 | Screw | 1 | |
| 21 | Socket Set Screw | M8xP1.25x35L | 1 |
| 22 | Hexagon Nut | M8xP1.25 | 1 |
| 23 | Socket Set Screw | M5xPO.8x25L | 4 |
| 24 | Plug | 1 | |
| 25 | Spool | 1 | |
| 26 | O-Ring | 1A-P10 | 1 |
| 27 | Plug | 1 | |
| 28 | Slide Screw | 1 | |
| 29 | O-Ring | 1A-P14 | 1 |
| 30 | Hexagon Nut | M16xP1.0 | 1 |
| 31 | Cap | 1 | |
| 32 | Piston | 1 |
| No. | Part Name | Specification | Quantity |
|---|---|---|---|
| 33 | Spring | 1 | |
| 34 | Piston | 1 | |
| 35 | O-Ring | 1A-P5 | 1 |
| 36 | O-Ring | 1A-P55 | 1 |
| 37 | Cover | 1 | |
| 38 | Socket Head Cap Screw | M6xP1.Ox25L | 4 |
| 39 | Socket Set Screw | M5xPO.8x10L | 1 |
| 40 | Socket Set Screw | M1Oxp1.5x12L | 1 |
| 41 | Plug | 1 | |
| 42 | Spring Pin | ø4×10 | 1 |
| 42-1 | Spring Pin | ø4×10 | 2 |
| 43 | Straight Pin | ø4×10 | 2 |
| 44 | English Bush | DIADO(Japan)DD2225 | 1 |
| 44-1 | English Bush | DIADO(Japan)DD2225 | 1 |
| 45 | Port Plate | 1 | |
| 46 | Rotorshaft | 1 | |
| 47 | Vanes | 13 | |
| 48 | Cam Ring | 2 | |
| 49 | Thrust Plate | 1 | |
| 50 | O-Ring | AS568-026 | 1 |
| 51 | Endless Back-up Ring | 1 | |
| 52 | O-Ring | AS568-034 | 1 |
| 53 | Endless Back-up Ring | 1 | |
| 52 | O-Ring | 1A-S85 | 1 |
| 55 | O-Ring | 1A-P6 | 2 |
| 56 | Cover | 1 | |
| 57 | Plug | 1/16″ | 2 |
| 58 | Socket Head Cap Screw | M10xP1.5x35L | 4 |
| 59 | Name Plate | 1 | |
| 60 | Fixing Screw | 2 | |
| 61 | Woodruff Key | NO. 608 | 1 |
| 62 | Spring Washer | M10 | 4 |
| 63 | Socket Head Cap Screw | M10xP1.5x30L | 4 |
Dimensions
VPF5-* * -50
